Separated Dth Drill Rig A5
Technical parameter as below
| Model | A5 | Hole range | Φ95-140 mm |
| Suitable DTH hammer sizes | 3/4/5 inch | Drill pipe handling capacity | 6 |
| Drill pipe outer diameter | 76/89 mm | Drill pipe length | 3m |
| Hole depth | 30 m | Rotation speed | 120 rpm |
| Max. torque | 2800 N.m | ||
|
Engine |
|||
| Engine model | Yuchai | Rated power | 73.5 kw |
| Emission standard | Tier III | Fuel tank capacity | |
| Weight | 5800 kg | Dimension | 6500*2250*2600 mm |
Application
Blast hole drilling rig is used most frequently in the mineral exploration industry among all the mining drilling equipment. This blasting rig is penetrating the rock via a air driven hammer and hammer bit. Its power supply comes from independent air compressor or on deck compressor or rock drill. The cuttings is blown out of hole by air It normally requires mining drill rigs have capacity of 15- 30m depth with 100 – 200mm blast hole diameter. Hard rock blast hole drill machine is dedicating to offer Mining Rigs with the latest and most advanced technology to ensure the most efficient of blast hole drilling and highest reliability. Our Blast hole drill is in various rod handling capacities, sizes, and angle drilling options. Known for excellent performance, efficiency, and low maintenance, our range finds application in mining and exploration industry.
Our Mining drill rigs are specifically designed for blast hole drilling to increase production and reduce down time. They are a modern versatile drill rig and come equipped with safety devices and ergonomics operating systems, it can guarantee that both safe and gets the job done properly without damaging a hole.
Related products
-
FY-200/FY-300 tracked pneumatic deep well drill...
Advantages The rig can be used for drilling on different formations with a maximum diameter of up to 350 mm. The rig adopts new hydraulic technology, which is equipped with high-torque hydraulic motor rotation and large-diameter hydraulic cylinder propulsion. The famous engine provides power for the hydraulic system, two-stage air filter and the intake air design of the compressed air to extend the service life of the diesel eng...
-
Energy-Saving Integrated Surface DTH Mine Drill...
Technical parameter as below Model ZGYX-421TA Engine model Yuchai YC6J220 Engine Power 162 kw Drill pipe size 60 *3000 mm Hole diameter 80-115 mm DTH hammer 3.5 inch Rotation torque 1650 N.m Rotation speed 0-110 rpm Working pressure 14.5 bar F.A.D 12 m³/min Tramming speed Dual speed:2/3 km/h Hill climbing ability 30° Track frame oscilation +-10° Weight 6800 kg Dimension 6000*2800*2750 mm ...
-
ZEGA D355 Blast hole drilling rig with cummins ...
-
ZEGA D470A DTH blasthole drilling rig
Three main types of holes are drilled in surface mining 1. Blast holes Hole diameter 115 – 229 mm (4½ – 9 in) Hole depth 6 – 20 m (18 – 60 ft) − Blast holes are production holes and will be filled with explosives − Drilling accuracy is important to obtain good and even distribution of the explosives in the rock − This will optimize fragmentation and facilitate further handling such as mucking, hauling and crushing 2.Buffer ...
-
ZEGA D545 Blast hole drilling rig with cummins ...
Features ■The standard configuration is two-meter drill pipe, model with dry dust collector and enhanced traveling motor. ■The rotary head is driven by a cycloidal gear motor, which has low failure rate, small size and large torque, and is suitable for a larger range of rock drilling apertures. ■The self-developed high-performance wet air filter is combined with the dry air filter to form a three-stage air filter system to bette...
-
ZGYX-420B Separated Blast hole drilling rig sma...
Technical parameter as below Specifications of Diesel Engine Drill Rig Model Engine Model Model Engine Model ZGYX-420B Yuchai YC4DK-80 @58 kW ZGYX-425/ZGYX-430 Yuchai YC4DK-80 @58 kW ZGYX-420B-1(with dust collector) Yuchai YC4DK-100@73.5 KW ZGYX-425-1(with dust collector)/ZGYX-430-1 Yuchai YC4DK-100@73.5 KW General specification Model ZGYX-420B/ZGYX420B-1 ZGYX-425 ZGYX-430 Drill pipe 76mm *3m 76mm*3m...