Water Well Drill Rig Fy450
Product Introduction
FY450 type water well drilling rig features
1. It is an efficient and multifunctional groundwater drilling equipment, which can be used for drilling water wells, agricultural irrigation wells, geothermal wells and other wells. It is especially suitable for water intake projects in mountainous areas and rock formations.
2. The machine can drill holes in different strata (rock layer, mud layer, sand layer), and the maximum diameter can reach 450mm.
3. This machine adopts high-torque hydraulic motor power head and brand diesel oil, and the hydraulic control system adopts large-diameter hydraulic cylinder. The brand diesel is protected by a two-stage air filtration system, and the clean air from the air compressor can also be used directly.
4. Unique bump design and centralized control operating system are easy to maintain and operate.
5. This machine adopts excavator crawler chassis, which has high off-road performance and can also be installed on trucks, with stronger mobility.
6. Two gear rotation and feed speed to make it work in soil and rock layers.
7. The independent heat dissipation dual system adopts hydraulic oil temperature cooling and is equipped with traditional air cooling. long engine life
8. Engine brand: Weichai (Deutz brand technology) 103KW Euro III emission standard
9. Dual systems can be installed: 1. Air power system with air compressor 2. Mud pump system with mud pump
Related products
-
ZEGA D470A DTH blasthole drilling rig
Three main types of holes are drilled in surface mining 1. Blast holes Hole diameter 115 – 229 mm (4½ – 9 in) Hole depth 6 – 20 m (18 – 60 ft) − Blast holes are production holes and will be filled with explosives − Drilling accuracy is important to obtain good and even distribution of the explosives in the rock − This will optimize fragmentation and facilitate further handling such as mucking, hauling and crushing 2.Buffer ...
-
Separated Dth Drill Rig Zgyx-412/412-1
ZGYX-412 ZGYX-412/412-1 drill rig upgrades the operation platform, tramming components, hydraulic system, feed beam, & rotary head from the original 410C to optimize the functional capability of the drill rig. Piston tramming motor greatly increases the work life of tramming mechanism. Upgraded operation platform can be controlled by one operator instead of two, to increase the work efficiency while lowering drilling cost. ⚫...
-
ZEGA D440 Higher productivity Better hole quali...
Technical parameter as below Model ZEGA D440A Hole range Φ90 - 130 mm Suitable DTH hammer sizes 3.5/4 inch Drill pipe handling capacity 6+1 Drill pipe outer diameter Φ68 / 76 mm Drill pipe length 4m Hole depth 28m Rotation speed 0-110 rpm Max. torque 2800 N.m Engine Engine model Cummins QSC8.3-C260-30 Rated power 194 kw Emission standard EU stage IIIA Fuel tank capacity 480L Air compressor- ZE...
-
ZGYX-416F Separated Blast hole drilling rig sma...
Technical parameter as below Specifications of Diesel Engine Drill Rig Model Engine Model ZGYX-416 Yuchai YC4DK80 58kW ZGYX-416-1(with dust collector) Yuchai YC4DK80 58kW General specification Model ZGYX-410 ZGYX-412 ZGYX-416 Drill pipe 60mm*2m 60mm *2m 60mm *3m Hole range Φ 90 – 110 mm Φ 90 – 110 mm Φ90-127mm Torque ( Max. ) 1650 N.m 1650 N.m 1950 N...
-
ZEGA D345A Blast hole drilling rig with cummins...
Technical parameter as below Model ZEGA D345 Hole range Φ110 - 152 mm Suitable DTH hammer sizes 4/5 inch Engine Cummins QSB3.9-C80 Drill pipe diameter Φ76 mm*3m Fuel tank capacity 80L Drill pipe length 3000 mm Hole depth 30 m Feeding Hydraulic cylinder-chain Feed length 5645 mm Travel length 3660 mm Feed extension 960 mm Feed max speed 26m/min Feed force 20 KN Pull up force 45 KN Tramming speed 2.5km/h Tractio...
-
Energy-Saving Integrated Surface DTH Mine Drill...
Technical parameter as below Model ZGYX-421TA Engine model Yuchai YC6J220 Engine Power 162 kw Drill pipe size 60 *3000 mm Hole diameter 80-115 mm DTH hammer 3.5 inch Rotation torque 1650 N.m Rotation speed 0-110 rpm Working pressure 14.5 bar F.A.D 12 m³/min Tramming speed Dual speed:2/3 km/h Hill climbing ability 30° Track frame oscilation +-10° Weight 6800 kg Dimension 6000*2800*2750 mm ...