Integrated DTH surface Drill ZGYX-452T/452HRig
Product Introduction
The drilling machine is supported by Yuchai YCA07260T-301 / 191 Kw with a 16/17screw air compressor. Meet 90-138 mm aperture, standard dry dust collector;
Using a single power to drive the screw air compressor and the hydraulic system of the drilling rig at the same time, compared with the split drilling rig, the comprehensive fuel consumption is 35% and the maintenance cost is reduced by 50%;The core hydraulic components are imported from Europe, and the reliable hydraulic system greatly reduces the workload of system maintenance, which is convenient and practical; Powerful two-speed hydraulic traveling mechanism, strong off-road capability, and high-torque rotary motor can easily deal with stuck; The two-stage dry dust collection device is environmentally friendly and also helps to improve production efficiency; integrated technology solves the problems of engineering, mine air compressor movement and remote management;
It is mainly suitable for drilling blasting holes in open-air projects such as mining and quarrying, road construction, hydraulic and electric construction sites, and national defense projects.
Technical parameter as below
Integrated DTH surface Drill Rig
|
Model |
ZGYX452T |
ZGYX452H |
|
Weight |
8,600 kg |
10,000 kg |
|
Dimension |
9,000×2,360×3,000 mm |
|
|
Power engine |
Yuchai 191kW |
|
|
Rotation torque (MAX) |
2,200 N/m |
|
|
Drilling hole diameter |
Ø90-138mm |
|
|
DTH hammer(Standard) |
4 inch |
|
|
Drilling rod |
Ø76*3000mm |
|
|
Diesel tank volume |
300L |
|
Application
Blast hole drilling rig is used most frequently in the mineral exploration industry among all the mining drilling equipment. This blasting rig is penetrating the rock via a air driven hammer and hammer bit. Its power supply comes from independent air compressor or on deck compressor or rock drill. The cuttings is blown out of hole by air It normally requires mining drill rigs have capacity of 15- 30m depth with 100 – 200mm blast hole diameter. Hard rock blast hole drill machine is dedicating to offer Mining Rigs with the latest and most advanced technology to ensure the most efficient of blast hole drilling and highest reliability. Our Blast hole drill is in various rod handling capacities, sizes, and angle drilling options. Known for excellent performance, efficiency, and low maintenance, our range finds application in mining and exploration industry.
Our Mining drill rigs are specifically designed for blast hole drilling to increase production and reduce down time. They are a modern versatile drill rig and come equipped with safety devices and ergonomics operating systems, it can guarantee that both safe and gets the job done properly without damaging a hole.
Related products
-
Water Well Drill Rig Fy180
Product Introduction Water well drill rig machine FY180 product features: FY180 water well drilling rig features: 1. Engine: well-known brand Yuchai turbocharged engine: 2. Traveling device: equipped with new traveling motor and reducer, with long service life. 3. Hydraulic oil pump: imported from the United States, parallel gearbox design, independent oil pump, providing sufficient and reasonable power distribution. The advance...
-
Energy-Saving Integrated Surface DTH Mine Drill...
Technical parameter as below Model ZGYX-421TA Engine model Yuchai YC6J220 Engine Power 162 kw Drill pipe size 60 *3000 mm Hole diameter 80-115 mm DTH hammer 3.5 inch Rotation torque 1650 N.m Rotation speed 0-110 rpm Working pressure 14.5 bar F.A.D 12 m³/min Tramming speed Dual speed:2/3 km/h Hill climbing ability 30° Track frame oscilation +-10° Weight 6800 kg Dimension 6000*2800*2750 mm ...
-
ZGYX -420S/425S Crawler Mounted Rock Drill Bolt...
Technical parameter as below Specifications of Diesel Engine Drill Rig Model Engine Model Model Engine Model ZGYX-420S Yuchai YC4DK-80 @58 kW ZGYX-425S Yuchai YC4DK-100 @73.5 kW General specification Model ZGYX-420S Model ZGYX-425S Drill pipe 76mm *3m Drill pipe 76mm*3m Hole range 90-203 mm Hole range 110-203 mm Hole depth 60 m Hole depth 60 m DTH hammer 4/5/6 inch DTH hammer 4/5/6 ...
-
water well drilling rig machina ZGSJ-200 with h...
Product features Track type multipurpose water well drill rig, all new designed, high efficiency and multipurpose hydraulic drill rig, mainly for drilling water wells, inspection wells and geothermal air vent wells, ect. 1.High premium configuration widely used in various well drilling applications. Combined with best features fromdomestic and international products and key hydraulic components, all global famous brands to ensur...
-
ZEGA D355 Blast hole drilling rig with cummins ...
-
ZGYX-420B Separated Blast hole drilling rig sma...
Technical parameter as below Specifications of Diesel Engine Drill Rig Model Engine Model Model Engine Model ZGYX-420B Yuchai YC4DK-80 @58 kW ZGYX-425/ZGYX-430 Yuchai YC4DK-80 @58 kW ZGYX-420B-1(with dust collector) Yuchai YC4DK-100@73.5 KW ZGYX-425-1(with dust collector)/ZGYX-430-1 Yuchai YC4DK-100@73.5 KW General specification Model ZGYX-420B/ZGYX420B-1 ZGYX-425 ZGYX-430 Drill pipe 76mm *3m 76mm*3m...