water well drill rig FY380
Product features
FY380 water well drilling rig features:
1. It is an efficient and multifunctional groundwater drilling equipment, which can be used for drilling water wells, agricultural irrigation wells, geothermal wells and other wells. It is especially suitable for water intake projects in mountainous areas and rock formations.
2. The machine can drill holes in different formations (rock layers, mud layers, sand layers), and the maximum aperture can reach 300mm.
3. This machine adopts high-torque hydraulic motor power head and brand diesel oil, and the hydraulic control system adopts large-diameter hydraulic cylinder. The brand diesel is protected by a two-stage air filtration system, and the clean air from the air compressor can also be used directly.
4. Unique bump design and centralized control operating system are easy to maintain and operate.
5. This machine adopts excavator crawler chassis, which has high off-road performance and can also be installed on trucks, with stronger mobility.
6. Two gear rotation and feed speed to make it work in soil and rock layers.
7. Dual systems can be installed: 1. Air power system with air compressor 2. Mud pump system with mud pump
Technical parameters
|
FY 380 crawler water well drilling rig |
|||
|
The weight（T） |
9.2 |
Drill pipe diameter（mm） |
Φ89 Φ102 |
|
The hole diameter（mm） |
140-325 |
Drill pipe length（m） |
1.5m 2.0m 3.0m 6.0m |
|
Drilling depth（m） |
380 |
Rig lifting force（T） |
24 |
|
One-time advance length（m） |
6.6 |
Rapid rise speed（m/min） |
20 |
|
Walking speed（km/h） |
2.5 |
Fast feeding speed（m/min） |
40 |
|
Climbing angles（Max.） |
30 |
Width of loading（m） |
2.8 |
|
Equipped capacitor（kw） |
96 |
Hoisting force of winch（T） |
2 |
|
Using air pressure（MPA） |
1.7-3.4 |
Swing torque（N.m） |
6500-9000 |
|
Air consumption（m³/min） |
17-36 |
Dimension（mm） |
5950×2100×2550 |
|
Swing speed（rpm） |
66-135 |
Equipped with hammer |
Medium and high wind pressure series |
|
The penetration efficiency（m/h） |
15-35 |
High leg stroke（m） |
1.6 |
|
The engine brand |
Yuchai engine ( National III ) |
||
Related products
-
Water Well Drill Rig Fy180
Product Introduction Water well drill rig machine FY180 product features: FY180 water well drilling rig features: 1. Engine: well-known brand Yuchai turbocharged engine: 2. Traveling device: equipped with new traveling motor and reducer, with long service life. 3. Hydraulic oil pump: imported from the United States, parallel gearbox design, independent oil pump, providing sufficient and reasonable power distribution. The advance...
-
ZGYX-425 Separated Blast hole drilling rig smal...
Technical parameter as below Specifications of Diesel Engine Model Engine Model ZGYX-425 Yuchai YC4DK-80 @58 kW ZGYX-425-1(with dust collector) Yuchai YC4DK-100@73.5 KW General specification Model ZGYX-425 Drill pipe 76mm*3m Hole range 110-152 mm Torque ( Max. ) 3200 N.m Rotation speed 0-100 r/min Feed force 20 KN Pull up force 45 KN Feed type Chain-cylinder Working pressure 0.7...
-
ZGYX-420 Separated Blast hole drilling rig smal...
Product selection criteria − Price and performance are important for quarry/limestone drillers − The smaller contractor is more price conscious and the big contractor or quarry owner is more performance focused − Product availability, service and support are essential factors − Drilling accuracy important for optimal drilling pattern and good fragmentation Mining drill rig & Blast hole drill Hardrock Blast hole drilling rig ...
-
ZEGA D345A Blast hole drilling rig with cummins...
Technical parameter as below Model ZEGA D345 Hole range Φ110 - 152 mm Suitable DTH hammer sizes 4/5 inch Engine Cummins QSB3.9-C80 Drill pipe diameter Φ76 mm*3m Fuel tank capacity 80L Drill pipe length 3000 mm Hole depth 30 m Feeding Hydraulic cylinder-chain Feed length 5645 mm Travel length 3660 mm Feed extension 960 mm Feed max speed 26m/min Feed force 20 KN Pull up force 45 KN Tramming speed 2.5km/h Tractio...
-
XCMG Articulated Dump Truck XDA45
Equipment Highlights and Features (i) Energy Saving and Environmentally Friendly Powered by an MTU engine that has high power, low emissions and low noise, which minimizes the environmental footprint. Compared with products of the same size class, it has more powerful traction force, higher working efficiency and enhanced roading ability; in addition, it’s durable, robust and excels in multiple operating environments. Extensivel...
-
ZGYX-420B Separated Blast hole drilling rig sma...
Technical parameter as below Specifications of Diesel Engine Drill Rig Model Engine Model Model Engine Model ZGYX-420B Yuchai YC4DK-80 @58 kW ZGYX-425/ZGYX-430 Yuchai YC4DK-80 @58 kW ZGYX-420B-1(with dust collector) Yuchai YC4DK-100@73.5 KW ZGYX-425-1(with dust collector)/ZGYX-430-1 Yuchai YC4DK-100@73.5 KW General specification Model ZGYX-420B/ZGYX420B-1 ZGYX-425 ZGYX-430 Drill pipe 76mm *3m 76mm*3m...