ZEGA D440 Higher productivity Better hole quality Blast hole drilling rig
Technical parameter as below
| Model | ZEGA D440A | Hole range | Φ90 - 130 mm |
| Suitable DTH hammer sizes | 3.5/4 inch | Drill pipe handling capacity | 6+1 |
| Drill pipe outer diameter | Φ68 / 76 mm | Drill pipe length | 4m |
| Hole depth | 28m | Rotation speed | 0-110 rpm |
| Max. torque | 2800 N.m | ||
|
Engine |
|||
| Engine model | Cummins QSC8.3-C260-30 | Rated power | 194 kw |
| Emission standard | EU stage IIIA | Fuel tank capacity | 480L |
|
Air compressor- ZEGA ZGDA 138IIIK-H |
|||
| Maximum working pressure | 20 bar (290PSI) | Rated F.A.D | 16 m³/min |
|
Feed beam |
|||
| Hydraulic motor | chain feeding system | Total length | 7475 mm |
| Travel length | 4585 mm | Feed extension | 1200 mm |
| Maximum feeding rate | 0.85m/s | Max. Feed force | 18 KN |
| Max pull up force | 24.8 KN | Tramming speed | 3km/h |
| Traction force | 115.4 KN | Hill climbing ability | 25° |
| Track frame oscillation angle | 士10° | Ground clearance | 450 mm |
| Weight | 14800 kg | Dimension | 9980*2480*3200 mm |
High efficiency, energy saving, environment friendly and safety
Equipped with a high-efficiency two-stage screw compression air compressor to achieve high air pressure rock drilling, excellent fuel economy performance, more energy-saving and more environmentally friendly
■The high-torque rotary head for jamming free drilling in most rock formations.
■Two-stage dry dust removal system meeting environment protection requirements.
■Fully enclosed air-conditioned cab for wide vision, and comfortable and safe operation.
■The new feed beam with excellent guidance and stability for high-precision drilling
Application
Blast hole drilling rig is used most frequently in the mineral exploration industry among all the mining drilling equipment. This blasting rig is penetrating the rock via a air driven hammer and hammer bit. Its power supply comes from independent air compressor or on deck compressor or rock drill. The cuttings is blown out of hole by air It normally requires mining drill rigs have capacity of 15- 30m depth with 100 – 200mm blast hole diameter. Hard rock blast hole drill machine is dedicating to offer Mining Rigs with the latest and most advanced technology to ensure the most efficient of blast hole drilling and highest reliability. Our Blast hole drill is in various rod handling capacities, sizes, and angle drilling options. Known for excellent performance, efficiency, and low maintenance, our range finds application in mining and exploration industry.
Our Mining drill rigs are specifically designed for blast hole drilling to increase production and reduce down time. They are a modern versatile drill rig and come equipped with safety devices and ergonomics operating systems, it can guarantee that both safe and gets the job done properly without damaging a hole.
Video
Related products
-
Integrated DTH surface Drill ZGYX-452T/452HRig
Product Introduction The drilling machine is supported by Yuchai YCA07260T-301 / 191 Kw with a 16/17screw air compressor. Meet 90-138 mm aperture, standard dry dust collector; Using a single power to drive the screw air compressor and the hydraulic system of the drilling rig at the same time, compared with the split drilling rig, the comprehensive fuel consumption is 35% and the maintenance cost is reduced by 50%;The core hydrau...
-
ZEGA D470A DTH blasthole drilling rig
Three main types of holes are drilled in surface mining 1. Blast holes Hole diameter 115 – 229 mm (4½ – 9 in) Hole depth 6 – 20 m (18 – 60 ft) − Blast holes are production holes and will be filled with explosives − Drilling accuracy is important to obtain good and even distribution of the explosives in the rock − This will optimize fragmentation and facilitate further handling such as mucking, hauling and crushing 2.Buffer ...
-
FY-200/FY-300 tracked pneumatic deep well drill...
Advantages The rig can be used for drilling on different formations with a maximum diameter of up to 350 mm. The rig adopts new hydraulic technology, which is equipped with high-torque hydraulic motor rotation and large-diameter hydraulic cylinder propulsion. The famous engine provides power for the hydraulic system, two-stage air filter and the intake air design of the compressed air to extend the service life of the diesel eng...
-
ZEGA D535T Surface integrated DTH drilling rig ...
Features ■The standard configuration is two-meter drill pipe, model with dry dust collector and enhanced traveling motor. ■The rotary head is driven by a cycloidal gear motor, which has low failure rate, small size and large torque, and is suitable for a larger range of rock drilling apertures. ■The self-developed high-performance wet air filter is combined with the dry air filter to form a three-stage air filter system to bette...
-
Shantui Bulldozer SD32
Product features The SD32 provides a showcase for Shantui’s prowess with high-effciency push factors. These medium-sized, but heavy-duty machines designed for earth-moving projects get the biggest, toughest jobs done quickly and effciently. SD32s are equipped with a hydraulic drive system with hydraulic control technology and an advanced structure, which provide reliable performance and convenient and fexible operation. ...
-
G7 Surface Top Hammer Drilling Rigs
Technical parameters Item Unit Drilling Hole diameter mm 76-115 Hole depth m 25 Drill pipe (Dia*Length) T51*3660 Pipe storage capacity pcs 6+1 Engine Brand DCEC cummins Engine model QSC8.3-C260-30 Power kW 194 Compressor Air delivery m³/min 6 Air pressure bar 9 Compression Single Rotary Max. rotation torque N.m 670 Rotation speed rpm 0-340 ...