ZEGA D535T Surface integrated DTH drilling rig with cummins engine
Features
■The standard configuration is two-meter drill pipe, model with dry dust collector and enhanced traveling motor.
■The rotary head is driven by a cycloidal gear motor, which has low failure rate, small size and large torque, and is suitable for a larger range of rock drilling apertures.
■The self-developed high-performance wet air filter is combined with the dry air filter to form a three-stage air filter system to better protect the diesel engine.
■The new cover design makes the maintenance and use of the drilling rig more convenient and more beautiful.
■Strengthened travel motor as standard configuration, more powerful climbing and more reliable quality.
■ZEGA Tunnel's self-designed guide wheels and hydraulic tension travel system are not easy to cause the crawler to be unchained.
■The whole series of drilling rigs have anti-counterfeiting marks, which can be checked at any time to distinguish the authenticity.
■The speed can be adjusted according to the rock conditions to increase the rock drilling speed.
■Double-station drill pipe warehouse can store more drill pipes, which is convenient for deep hole rock drilling and single-person operation.
Technical parameter as below
| Model | ZEGA D535 | Hole range | 80-115 mm |
| Suitable DTH hammer sizes | 3.5 inch | Engine | Cummins QSB5.9 |
| Drill pipe diameter | 60 mm | Fuel tank capacity | 170L |
| Drill pipe length | 3m or 2m | Drill pipe handling capacity | 6+1 |
| Feeding | Hydraulic cylinder-chain | Feed length | 5340 mm |
| Travel length | 3200 mm | Feed extension | 960 mm |
| Feed max speed | 0.75 m/s | Feed force | 15 KN |
| Pull up force | 25 kN | Tramming speed | 3.2km/h |
| Rotation torque | 1450 N.m | Hill climbing ability | 25° |
| Ground clearance | 540 mm | Weight | 2560 kg |
| F.A.D | 12 m³/min | Dimension | 6050*2560*2720 mm |
| Feed rate | 50 m/min | Emission standard | Tier 3 |
Application
Blast hole drilling rig is used most frequently in the mineral exploration industry among all the mining drilling equipment. This blasting rig is penetrating the rock via a air driven hammer and hammer bit. Its power supply comes from independent air compressor or on deck compressor or rock drill. The cuttings is blown out of hole by air It normally requires mining drill rigs have capacity of 15- 30m depth with 100 – 200mm blast hole diameter. Hard rock blast hole drill machine is dedicating to offer Mining Rigs with the latest and most advanced technology to ensure the most efficient of blast hole drilling and highest reliability. Our Blast hole drill is in various rod handling capacities, sizes, and angle drilling options. Known for excellent performance, efficiency, and low maintenance, our range finds application in mining and exploration industry.
Our Mining drill rigs are specifically designed for blast hole drilling to increase production and reduce down time. They are a modern versatile drill rig and come equipped with safety devices and ergonomics operating systems, it can guarantee that both safe and gets the job done properly without damaging a hole.
Related products
-
ZEGA D355 Blast hole drilling rig with cummins ...
-
Integrated DTH surface Drill ZGYX-452T/452HRig
Product Introduction The drilling machine is supported by Yuchai YCA07260T-301 / 191 Kw with a 16/17screw air compressor. Meet 90-138 mm aperture, standard dry dust collector; Using a single power to drive the screw air compressor and the hydraulic system of the drilling rig at the same time, compared with the split drilling rig, the comprehensive fuel consumption is 35% and the maintenance cost is reduced by 50%;The core hydrau...
-
ZEGA D450 Higher productivity Better hole quali...
Technical parameter as below Model ZEGA D450A Hole range Φ115 - 138 mm Suitable DTH hammer sizes 3.5/4 /5 inch Drill pipe handling capacity 6+1 Drill pipe outer diameter Φ76 mm Drill pipe length 4m Hole depth 28m Rotation speed 0-105 rpm Max. torque 2800 N.m Engine Engine model Cummins QSC8.3-C260-30 Rated power 194 kw Emission standard EU stage IIIA Fuel tank capacity 350L Air compressor- ZEG...
-
ZGYX-425 Separated Blast hole drilling rig smal...
Technical parameter as below Specifications of Diesel Engine Model Engine Model ZGYX-425 Yuchai YC4DK-80 @58 kW ZGYX-425-1(with dust collector) Yuchai YC4DK-100@73.5 KW General specification Model ZGYX-425 Drill pipe 76mm*3m Hole range 110-152 mm Torque ( Max. ) 3200 N.m Rotation speed 0-100 r/min Feed force 20 KN Pull up force 45 KN Feed type Chain-cylinder Working pressure 0.7...
-
ZEGA D470A DTH blasthole drilling rig
Three main types of holes are drilled in surface mining 1. Blast holes Hole diameter 115 – 229 mm (4½ – 9 in) Hole depth 6 – 20 m (18 – 60 ft) − Blast holes are production holes and will be filled with explosives − Drilling accuracy is important to obtain good and even distribution of the explosives in the rock − This will optimize fragmentation and facilitate further handling such as mucking, hauling and crushing 2.Buffer ...
-
Shantui Bulldozer SD32
Product features The SD32 provides a showcase for Shantui’s prowess with high-effciency push factors. These medium-sized, but heavy-duty machines designed for earth-moving projects get the biggest, toughest jobs done quickly and effciently. SD32s are equipped with a hydraulic drive system with hydraulic control technology and an advanced structure, which provide reliable performance and convenient and fexible operation. ...