ZGYX-420B Separated Blast hole drilling rig small model
Technical parameter as below
|
Specifications of Diesel Engine |
|||
|
Drill Rig Model |
Engine Model | Model | Engine Model |
|
ZGYX-420B |
Yuchai YC4DK-80 @58 kW | ZGYX-425/ZGYX-430 | Yuchai YC4DK-80 @58 kW |
|
ZGYX-420B-1(with dust collector) |
Yuchai YC4DK-100@73.5 KW | ZGYX-425-1(with dust collector)/ZGYX-430-1 | Yuchai YC4DK-100@73.5 KW |
|
General specification |
|||
|
Model |
ZGYX-420B/ZGYX420B-1 | ZGYX-425 | ZGYX-430 |
|
Drill pipe |
76mm *3m | 76mm*3m | 76mm*3m |
|
Hole range |
90-140 mm | 110-152 mm | 110-165 mm |
|
Torque ( Max. ) |
3200 N.m | 3200 N.m | 3500 N.m |
|
Rotation speed |
60-120 r/min | 0-100 r/min | 0-100 r/min |
|
Feed force |
20 KN | 20 KN | 20 KN |
|
Pull up force |
45 KN | 45 KN | 45 KN |
|
Feed type |
Chain-cylinder | Chain-cylinder | Chain-cylinder |
|
Working pressure |
0.7-2.5 Mpa | 0.7-2.5 Mpa | 0.7-2.5 Mpa |
|
F.A.D |
8-20 m³/min | 8-20 m³/min | 10-20 m³/min |
|
Length of feed beam |
5600 mm | 5645 mm | 5645 mm |
|
Feed travel length |
3000 mm | 3660 mm | 3660 mm |
|
Feed extension |
970 mm | 960 mm | 960 mm |
|
Feed speed |
26m/min | 26m/min | 26m/min |
|
Tramming speed |
2.5km/h | 2.5km/h | 3km/h |
|
Hole depth |
30 m | 30 m | 30 m |
|
Ground clearance |
313 mm | 280 mm | 280 mm |
|
Hill climbing ability |
25° | 25° | 25° |
|
Weight |
5200 kg | 6000 kg | 6460 kg |
|
Dimension |
5100*2306*2550 mm | 7000*2250*2700 mm | 7370*2360*2560 mm |
Related products
-
ZEGA D450 Higher productivity Better hole quali...
Technical parameter as below Model ZEGA D450A Hole range Φ115 - 138 mm Suitable DTH hammer sizes 3.5/4 /5 inch Drill pipe handling capacity 6+1 Drill pipe outer diameter Φ76 mm Drill pipe length 4m Hole depth 28m Rotation speed 0-105 rpm Max. torque 2800 N.m Engine Engine model Cummins QSC8.3-C260-30 Rated power 194 kw Emission standard EU stage IIIA Fuel tank capacity 350L Air compressor- ZEG...
-
ZEGA D355 Blast hole drilling rig with cummins ...
-
JIEA-B10 Integrated DTH drill rig
Technical features Undercarriage Crawler length 3500mm Wheel-base 2480mm Track shoes width 350 mm Supporting weight drum amount 8×2 Travel reducer FTM22×2 Max traction force 160 kN Max gradient 20° Max travel speed 3km/h Ground clearance 380mm Engine Engine type Cummins QSL8.9-C360-32 Rated power 294kW@2000 Max. Torque 2200Nm@1600rpm Rated speed 1800r/min Emission certification Tier 3 ...
-
water well drill rig FY380
Product features FY380 water well drilling rig features: 1. It is an efficient and multifunctional groundwater drilling equipment, which can be used for drilling water wells, agricultural irrigation wells, geothermal wells and other wells. It is especially suitable for water intake projects in mountainous areas and rock formations. 2. The machine can drill holes in different formations (rock layers, mud layers, sand layers), an...
-
Water Well Drill Rig Fy180
Product Introduction Water well drill rig machine FY180 product features: FY180 water well drilling rig features: 1. Engine: well-known brand Yuchai turbocharged engine: 2. Traveling device: equipped with new traveling motor and reducer, with long service life. 3. Hydraulic oil pump: imported from the United States, parallel gearbox design, independent oil pump, providing sufficient and reasonable power distribution. The advance...
-
ZEGA D545 Blast hole drilling rig with cummins ...
Features ■The standard configuration is two-meter drill pipe, model with dry dust collector and enhanced traveling motor. ■The rotary head is driven by a cycloidal gear motor, which has low failure rate, small size and large torque, and is suitable for a larger range of rock drilling apertures. ■The self-developed high-performance wet air filter is combined with the dry air filter to form a three-stage air filter system to bette...